Pitch correction settings explained: speed, strength, drift and vibrato
Retune speed is how long the corrector takes to pull a note to pitch once it starts. Fast (0 to 10 ms) sounds stepped and synthetic. Slow (30 to 80 ms) lets the natural slide into each note through and sounds like singing. Strength decides how far the note moves; speed decides how suddenly.
The four controls
Speed. Measured in milliseconds. A singer takes roughly 50 to 150 ms to travel between notes. If correction is faster than that, the travel disappears and the pitch jumps like a keyboard.
Strength or amount. The fraction of the distance to the target that the note is moved. At 100% the note's centre lands exactly on pitch. At 70% a note that was 30 cents flat ends up 9 cents flat, which nobody hears.
Drift, sometimes called flatten or humanize. A held note wanders a few cents over its length. This control decides how much of that slow wander is ironed out. It's separate from vibrato, which is faster and regular.
Vibrato. Depth can usually be kept, scaled down or scaled up. Removing it completely makes a held note sound like a test tone.
Starting points
| Goal | Speed | Strength | Drift | Vibrato |
|---|---|---|---|---|
| Invisible, singer-songwriter | 50 to 80 ms | 60 to 75% | 20 to 40% | as sung |
| Modern pop lead, tight | 15 to 30 ms | 85 to 100% | 50 to 70% | as sung or slightly less |
| Backing vocal stack | 20 to 40 ms | 90 to 100% | 60% | reduced |
| Hard-tune effect | 0 to 5 ms | 100% | 100% | removed |
| Bass or lead instrument line | 10 to 30 ms | 80 to 100% | 50% | as played |
Why note-based correction behaves better
Older automatic tuners work on the pitch from moment to moment. They can't tell a scoop from a wrong note, so one speed setting has to serve both. Note-based correction finds where each note starts and ends, measures its centre, and shifts the whole note by one amount. The scoop and the vibrato ride along unchanged, and the speed setting only shapes the edges.
That's also why a note-based tool can skip notes. If a note's centre is within 8 or 10 cents of the target, there's nothing to gain by processing it.
Common mistakes
- Wrong key. With a major scale selected for a song that borrows a flat seventh, every one of those notes gets dragged a semitone. Use the right scale, or chromatic.
- Fast speed on a slow song. Long notes expose the stepped onset.
- Tuning doubles identically. Two takes corrected to exactly the same pitch can phase against each other. Leave one a little looser.
Quick answers
- What retune speed gives the robotic effect?
- 0 to 5 ms with full strength and the correct key. The instant jump between notes is the effect.
- What is a good retune speed for natural vocals?
- 30 to 80 ms. Slower ballads can go to 100 ms or more.
Audizer does this when you ask.A Mac DAW with an engineer built in. Say what you want and it makes the edit. Free download.
Get Audizer