Audizer
Mixing

EQ frequency chart

Seven ranges cover most EQ decisions: sub (20 to 60 Hz), bass (60 to 250 Hz), low mids (250 to 500 Hz), mids (500 Hz to 2 kHz), upper mids (2 to 5 kHz), presence and sibilance (5 to 10 kHz) and air (10 kHz up). Most problems have a name that points to a range.

The ranges

RangeNameToo muchToo littleLives here
20 to 60 HzSubRumble, flabby, eats headroomNo weightKick thump, lowest bass notes, 808s
60 to 250 HzBassBoomyThinBass and kick body, low end of guitars, piano and voice
250 to 500 HzLow midsMuddy, boxyHollowBody of nearly everything. Problems pile up here
500 Hz to 2 kHzMidsHonky, nasal, "telephone"Scooped, distantVocal character, guitar bite, snare body
2 to 5 kHzUpper midsHarsh, tiringDull, words hard to followVocal intelligibility, pick and stick attack
5 to 10 kHzPresenceSibilant, brittleLacks definitionConsonants, cymbals, snare wires
10 to 20 kHzAirHissy, fizzyClosed-inBreath, shimmer, room

Problem words and where to look

It sounds…Look atTypical move
Boomy80 to 200 HzCut 2 to 4 dB on the offending track
Muddy200 to 400 HzCut 2 to 4 dB across several supporting parts
Boxy300 to 600 HzNarrow cut, 3 dB
Honky or nasal800 Hz to 1.5 kHzNarrow cut, 2 to 3 dB
Harsh2.5 to 5 kHzCut 2 dB, or use dynamic control
Sibilant5 to 9 kHzDe-esser
Dull3 to 5 kHz and above 10 kHzGentle boosts, or cut low mids instead
Thin100 to 250 HzLower the high-pass, or boost 2 dB

By instrument

InstrumentWeightBodyAttack or presenceAir
Kick50 to 80 Hz100 to 200 Hz3 to 5 kHz (beater)
Snare150 to 250 Hz400 to 800 Hz3 to 6 kHz8 to 10 kHz (wires)
Bass guitar50 to 100 Hz150 to 300 Hz700 Hz to 1.5 kHz (growl), 2.5 kHz (string)
Electric guitar100 to 200 Hz300 to 600 Hz2 to 4 kHz
Acoustic guitar100 to 200 Hz200 to 400 Hz3 to 5 kHz10 kHz up
Piano60 to 120 Hz200 to 500 Hz2 to 5 kHz8 kHz up
Vocal100 to 250 Hz250 to 500 Hz2 to 5 kHz10 kHz up
Cymbals300 to 600 Hz (gong)5 to 8 kHz10 kHz up

Using a chart sensibly

These are starting places to sweep from. Every voice and instrument differs, so find the exact spot by ear: boost 6 dB with a narrow Q, sweep through the range until the problem jumps out, then turn the boost into a cut.

A few habits make EQ go better:

  • Cut narrow, boost wide. Narrow cuts remove a problem without changing tone. Wide boosts sound natural.
  • Small moves. 2 to 3 dB is a real change. If you need 8, the problem is the recording, the arrangement or another track.
  • Decide in the mix. A part EQ'd to sound full on its own usually has too much low-mid for the mix.
  • Two tracks fighting? Cut one where the other needs to be heard, by 2 dB. Don't boost both.

Quick answers

What frequency is muddy?
200 to 500 Hz. Too much energy there makes a mix sound thick and unclear.
What frequency is harsh?
2 to 5 kHz. The ear is most sensitive there, so excess is tiring quickly.

Audizer does this when you ask.A Mac DAW with an engineer built in. Say what you want and it makes the edit. Free download.

Get Audizer

Updated 2026-11-15. Corrections: support@intuzu.com