Audizer
Timing

How to quantize MIDI without losing the feel

Pick a grid equal to the shortest note you actually played, set strength to 50 to 75%, and quantize note starts only. Leave lengths and velocities as performed. If the part swings, use a triplet grid or quantize by hand.

Why full quantize sounds stiff

A played part carries three kinds of information: when each note starts, how long it lasts and how hard it was hit. Hard quantize at 100% erases the first, and many people follow it by evening out the other two. What's left is a list of notes.

Strength keeps some of the first. At 60%, a note 30 ms late moves to 12 ms late. It now sounds in time, and it's still a little late, as the player intended.

Choosing the grid

PartGridNotes
Four-on-the-floor kick, straight hats1/16100% is fine here
Rock or pop drums1/1660 to 80%. Protect ghost notes
Shuffle, swing, 12/81/8T or 1/16TOr straight 1/16 with swing
Piano chords, pads1/850 to 60%, or leave them
Bass line1/1660 to 75%, then check against the kick
Fast arpeggios1/16 or 1/3280 to 100%
Strings, slow attack soundsnoneDrag early by ear instead

A grid finer than the part needs pulls slightly wrong notes to the wrong line. A 1/8-note piano part quantized at 1/32 can snap a late chord to the following 32nd.

The steps

  1. Listen first. Find the 3 or 4 notes that are actually wrong.
  2. Select only the range that needs it. Leave the fill at the end of bar 8 out.
  3. Quantize starts at 50 to 75%.
  4. Play it against the drums. If it's better but not there, apply the same pass again; two passes at 50% equal one at 75%.
  5. Fix remaining stragglers by hand.
  6. Don't touch velocity unless specific notes poke out. If they do, pull those down 10 to 20 and leave the rest.

Chords need care

A played chord is rolled: the notes land a few milliseconds apart. Quantizing stacks them into a block, which sounds like a sequencer. Either quantize at low strength so the roll survives at half size, or move the whole chord as a unit so its internal spacing stays.

Slow sounds play late

A string patch with a 60 ms attack sounds late even when its MIDI notes are dead on the grid, because the ear hears the note when it reaches full level. Don't quantize these. Slide the part 20 to 50 ms early until it speaks on the beat.

Swing

Swing delays every second 16th or 8th. At 50% the grid is straight; at 66.7% it's a full triplet feel. Most hip-hop and house sits between 54 and 62%. If your quantize has no swing control, a triplet grid gives you the full version, and partial strength on a straight grid keeps whatever swing you played in.

Quick answers

What quantize strength should I use?
50 to 75% for parts that should sound played. 100% for electronic styles where a machine feel is the goal.
What does 1/16T mean?
A 16th-note triplet grid: three evenly spaced notes in the time of two 16ths.

Audizer does this when you ask.A Mac DAW with an engineer built in. Say what you want and it makes the edit. Free download.

Get Audizer

Updated 2026-11-15. Corrections: support@intuzu.com