How to quantize audio drums without phase problems
Slice at each hit, a few milliseconds before the transient, and move every slice toward the grid by 50 to 80%. If the kit was recorded with several microphones, cut and move all of those tracks together at exactly the same points. Fill the gaps and crossfade each edit.
Why phase is the risk
A snare hit reaches the snare mic first, the overheads about 3 ms later, and the room mics later still. Those fixed delays are part of the kit's sound. If you quantize each track on its own, the snare mic's slice moves 12 ms and the overhead's moves 9 ms, and the relationship between them changes on every hit.
When two mics carrying the same drum shift against each other, some frequencies cancel. A 1 ms shift cancels around 500 Hz. A 0.5 ms shift cancels around 1 kHz. The snare goes hollow on some hits and not others, and the kick loses weight at random. It sounds like a bad flanger.
The rule that prevents it: every microphone on the kit gets the same cuts, moved by the same amounts.
The process
- Group the drum tracks so an edit on one happens on all.
- Detect the hits from the close mics. Use the kick and snare to define where the slices fall. Overheads and rooms have smeared transients and make poor guides.
- Cut slightly early. Place each cut 2 to 5 ms before the transient so the whole attack travels with its slice.
- Pick a grid that matches the part. 1/8 for a straight rock beat, 1/16 for busier playing. Too fine a grid snaps ghost notes and flams to the wrong place.
- Use partial strength. 60% moves a hit that was 20 ms late to 8 ms late.
- Fill the gaps. Moving a slice later leaves a hole before it. Extend the previous slice's tail to cover it.
- Crossfade every cut, 3 to 10 ms, placed in the quiet just before the hit.
- Listen to the cymbals. Long decays expose bad edits first. If a crash stutters, undo that slice.
What not to quantize
- Fills and flams. Their timing is the point.
- A drummer who's deliberately behind the beat. Move the whole section instead.
- Parts recorded without a click. There's no grid to move toward. Map the tempo first, or leave it.
Single-source parts are easy
A drum loop, a stereo drum bounce, a tambourine overdub, a DI bass or a rhythm guitar has only one track, so nothing can go out of phase with anything. Slice and move freely.
Quick answers
- Why do my drums sound thin after quantizing?
- The mics were moved by different amounts. Even a 1 ms offset between two mics on the same drum cancels frequencies around 500 Hz. Edit all the drum tracks together with identical cuts.
- Should drums be quantized to 100%?
- Rarely. 50 to 80% tightens the performance and keeps the push and pull that makes it feel played.
Audizer does this when you ask.A Mac DAW with an engineer built in. Say what you want and it makes the edit. Free download.
Get Audizer