Audizer
Calculator

Buffer latency calculator

One buffer of latency is the buffer size divided by the sample rate. You pay it once on the way in and once on the way out.

One buffer5.3 ms
In plus out, at least10.7 ms
Like standing this far from the amp3.7 m
Buffer (samples)44.1 kHz48 kHz88.2 kHz96 kHz
320.70.70.40.3
641.51.30.70.7
1282.92.71.51.3
2565.85.32.92.7
51211.610.75.85.3
102423.221.311.610.7
204846.442.723.221.3

Milliseconds for one buffer. Real round-trip latency is higher: converters and drivers add their own delay on top of the two buffers.

Samples as time5.00 ms
Time as samples240 samples

Which buffer to use

For recording while monitoring through the computer, use the smallest buffer that plays without clicks, usually 64 or 128 samples. Singers and guitarists start to feel the delay somewhere past 10 ms of round trip. For mixing, where nothing is being played live, go to 512 or 1024 and give the processor room for more plugins.

Sound travels about 34 cm per millisecond, so 10 ms of latency is like standing 3.4 metres from your amp. That comparison is a decent guide to what a player will tolerate.

A DAW that knows its input and output latency shifts each recorded take back by that amount, so what you played lines up with what you heard. The delay you feel while monitoring is separate and only a smaller buffer or direct monitoring on the interface fixes it.

Quick answers

How many milliseconds is a 256 sample buffer?
5.3 ms at 48 kHz and 5.8 ms at 44.1 kHz for one buffer. Round trip is at least twice that.
What buffer size is best for recording vocals?
64 or 128 samples if your computer can hold it without clicks, or use the direct monitoring on your interface and any buffer you like.
Does a higher sample rate lower latency?
Yes, for the same buffer size: 256 samples is 5.3 ms at 48 kHz and 2.7 ms at 96 kHz. The processor works roughly twice as hard at the higher rate.

Audizer measures this for you.A Mac DAW with an assistant that reads the numbers before and after every change.

Get Audizer