Latency and buffer size
Latency for one buffer is buffer size divided by sample rate: 256 samples at 48 kHz is 5.3 ms. You get one buffer on the way in and one on the way out, plus converter time. Record at 64 or 128 samples if the computer can hold it. Mix at 512 or 1024.
The arithmetic
| Buffer | 44.1 kHz | 48 kHz | 96 kHz |
|---|---|---|---|
| 32 | 0.7 ms | 0.7 ms | 0.3 ms |
| 64 | 1.5 ms | 1.3 ms | 0.7 ms |
| 128 | 2.9 ms | 2.7 ms | 1.3 ms |
| 256 | 5.8 ms | 5.3 ms | 2.7 ms |
| 512 | 11.6 ms | 10.7 ms | 5.3 ms |
| 1024 | 23.2 ms | 21.3 ms | 10.7 ms |
These are for one buffer. Round-trip latency, from the microphone through the computer and back to the headphones, is at least double, plus 1 to 3 ms for the converters and driver. The buffer latency calculator does the sums for any setting.
What players can feel
Sound travels about 34 cm in a millisecond, so 10 ms of latency is like standing 3.4 metres from your amp. Guitarists do that on stage every night.
- Under 5 ms: nobody notices.
- 5 to 10 ms: fine for guitar, bass and keys. Singers may hear a slight hollowness, because the delayed headphone signal combines with the sound of their own voice arriving through the skull.
- 10 to 20 ms: drummers and fast pickers start to feel it.
- Over 20 ms: an audible slap. Timing suffers.
Two different things called latency
Monitoring latency is the delay you feel while playing. Only a smaller buffer or direct monitoring fixes it. Direct monitoring routes the input straight to the headphones inside the interface, with no trip through the computer, at the cost of not hearing plugins on the live signal.
Recording offset is where the take lands on the timeline. The DAW knows how late the input arrives and shifts each recorded take earlier by that amount, so what you played lines up with what you heard. If overdubs consistently sound late on playback, this compensation is wrong or missing.
Practical settings
- Tracking with software monitoring: 64 or 128 samples. Bypass look-ahead limiters and linear-phase EQs, which add their own delay.
- Tracking with direct monitoring: any buffer. 256 is a safe default.
- Mixing: 512 or 1024. Nothing is being played live, so give the processor room.
- Sample rate: doubling it halves the latency for a given buffer and roughly doubles the processor load.
Quick answers
- What is a good latency for recording?
- Under 10 ms round trip feels immediate to most players. Singers monitoring their own voice in headphones are the most sensitive and prefer under 5 ms or direct monitoring.
- Why do I get clicks and pops at low buffer sizes?
- The computer can't finish processing each buffer in time. Raise the buffer, freeze or bypass heavy plugins, or monitor directly from the interface.
Audizer does this when you ask.A Mac DAW with an engineer built in. Say what you want and it makes the edit. Free download.
Get Audizer