Audizer
Vocals

Vocal compression settings: where to start

Start at a 3:1 ratio, 10 ms attack, 60 ms release and a soft knee. Lower the threshold until the loudest phrases show 4 to 6 dB of gain reduction and quiet ones show 1 or 2. Then add makeup gain so the level matches bypass.

Starting points by style

StyleRatioAttackReleaseGain reduction
Acoustic, folk, jazz2:1 to 3:115 to 30 ms80 to 150 ms2 to 4 dB
Pop4:15 to 10 ms40 to 80 ms5 to 8 dB
Rock4:1 to 6:15 to 15 ms50 to 100 ms6 to 10 dB
Rap4:1 to 8:12 to 10 ms30 to 60 ms6 to 10 dB
Backing vocals4:1 to 8:12 to 5 ms50 to 100 ms6 to 12 dB

How to set each control

Threshold. Set it last. Pull it down while the singer is at their loudest until the meter shows the reduction you want.

Attack. This decides how much of each consonant gets through before the compressor clamps. At 1 ms the "t" and "k" sounds are squashed and the vocal goes soft and distant. At 10 ms they pass and the vocal sounds forward. If words seem to jump at their start, go faster.

Release. Should let the gain recover between syllables without audible pumping. Too fast, under 30 ms, and you hear breaths and room noise surge up after each word. Too slow, over 200 ms, and the quiet word after a loud one is still being held down.

Knee. A soft knee of 6 dB or so eases the compressor in and is nearly always right for vocals.

Makeup gain. Match the compressed level to bypass by ear, then decide whether you like it. Louder always sounds better, so an unmatched comparison tells you nothing.

Two stages beat one

Asking a single compressor for 10 dB makes its action audible. Split the work: a first compressor at 4:1 with a fast attack catching 3 to 4 dB on peaks, and a second at 2:1 with a slower attack taking another 2 to 3 dB off everything. Each works within its comfortable range.

Before you reach for more ratio

If the meter swings between nothing and 12 dB, the problem is the input. Level the phrases first, and the same settings will hold steady. If compression makes the "s" sounds harsh, that's expected: it raises quiet high-frequency detail. Follow it with a de-esser.

Quick answers

How much gain reduction should a vocal compressor show?
3 to 6 dB on the loudest phrases for most styles. Dense pop and rock vocals often take 6 to 10 dB spread across two compressors.
Should attack be fast or slow on vocals?
Medium, 5 to 15 ms. Faster than 2 ms dulls consonants; slower than 30 ms lets every word start with a jump.

Audizer does this when you ask.A Mac DAW with an engineer built in. Say what you want and it makes the edit. Free download.

Get Audizer

Updated 2026-11-15. Corrections: support@intuzu.com