Decibel calculator
Decibels are ratios on a log scale. For signal level, +6 dB doubles the amplitude and −20 dB is one tenth of it.
| dB | Amplitude | Power |
|---|---|---|
| +12 | ×3.981 | ×15.849 |
| +6 | ×1.995 | ×3.981 |
| +3 | ×1.413 | ×1.995 |
| +1 | ×1.122 | ×1.259 |
| 0 | ×1.000 | ×1.000 |
| −1 | ×0.891 | ×0.794 |
| −3 | ×0.708 | ×0.501 |
| −6 | ×0.501 | ×0.251 |
| −10 | ×0.316 | ×0.100 |
| −12 | ×0.251 | ×0.063 |
| −18 | ×0.126 | ×0.016 |
| −20 | ×0.100 | ×0.010000 |
| −40 | ×0.0100 | ×0.000100 |
| −60 | ×0.0010 | ×0.000001 |
The formulas
dB = 20 × log10(amplitude ratio) = 10 × log10(power ratio). Going the other way, amplitude ratio = 10^(dB ÷ 20).
Why sums matter when you mix
Two different instruments at the same level add about 3 dB on the bus, because their waveforms are unrelated. Two copies of the same signal add 6 dB. That gap explains a few everyday things: why a doubled part panned centre seems so much louder than two different parts, why a mono fold-down of a wide mix changes the balance, and why sixteen tracks each peaking at −6 dBFS will clip the master.
A useful rule: every time the number of similar-level tracks doubles, expect the bus to rise about 3 dB. Eight tracks sit roughly 9 dB above one.
dBFS, dBTP, LU
dBFS is level relative to digital full scale, where 0 is the highest sample value. dBTP is true peak, the level of the reconstructed waveform between samples. LU is a loudness unit; 1 LU equals 1 dB of gain change, so a master at −10 LUFS is 4 LU above a −14 target and will be turned down 4 dB.
Quick answers
- How much louder is 6 dB?
- 6 dB doubles the signal amplitude and quadruples the power. Most people hear about a 10 dB increase as twice as loud.
- How do I convert a ratio to dB?
- For amplitude or voltage, dB = 20 × log10(ratio). For power, dB = 10 × log10(ratio).
- What do two tracks at the same level add up to?
- About 3 dB more if they are different signals, and 6 dB more if they are identical.
Audizer measures this for you.A Mac DAW with an assistant that reads the numbers before and after every change.
Get Audizer