Audizer
Calculator

LUFS gain calculator

Streaming services measure the loudness of your master and turn it up or down toward their own target. Enter your numbers to see the result on each service.

ServiceTargetGain appliedPlays at (LUFS)Peak after (dBTP)What happens
Spotify−14−4.5 dB−14.0−4.8turned down
Apple Music−16−6.5 dB−16.0−6.8turned down
YouTube−14−4.5 dB−14.0−4.8turned down
Tidal−14−4.5 dB−14.0−4.8turned down
Amazon Music−14−4.5 dB−14.0−4.8turned down
Deezer−15−5.5 dB−15.0−5.8turned down

At −9.5 LUFS this master gets turned down 4.5 dB on a −14 service. The loudness you bought with the limiter is given back, and the limiting stays.

Where the targets come from

Spotify publishes its figures: it adjusts tracks to −14 LUFS measured to ITU-R BS.1770, raises quieter masters as far as it can while leaving 1 dB of headroom, and lets Premium listeners choose a Loud (−11) or Quiet (−19) setting instead. Its guidance is to keep true peak under −1 dBTP, or under −2 dBTP if the master is louder than −14 LUFS. Source: Spotify for Artists, Loudness normalization.

The other figures here are the commonly cited ones as of November 2026: about −16 LUFS for Apple Music with Sound Check on, −14 for YouTube, Tidal and Amazon Music, and −15 for Deezer. Not all of these services publish their numbers, and they change them without notice. YouTube, Tidal, Amazon Music and Deezer are generally reported to turn loud tracks down and leave quiet ones alone, which is how this calculator treats them.

Listeners can switch normalisation off, and some playback paths don't apply it at all. Treat the table as what most listeners will hear, and make the master sound right first.

Reading your result

If every row says “turned down”, the master is louder than it needs to be for streaming. That isn't wrong, and dense genres often sit at −9 or −8 LUFS on purpose. It does mean the last few decibels of limiting bought no extra loudness on these services. Try a version 2 dB quieter and compare the two at matched level.

Quick answers

What LUFS should I master to for Spotify?
Spotify normalises to −14 LUFS and asks for true peak below −1 dBTP. A master near −14 is played as it is; a louder one is turned down to match.
Will a quiet master be turned up?
On Spotify, yes, as far as it can while keeping peaks under −1 dBTP. Several other services are reported to turn loud tracks down only, so a quiet master stays quiet there.
Does normalisation change how my master sounds?
It changes only the playback level. It does not undo limiting or compression, so a heavily limited master sounds just as limited after being turned down.

Audizer measures this for you.A Mac DAW with an assistant that reads the numbers before and after every change.

Get Audizer