LUFS targets for every streaming service
Most streaming services play music at about −14 LUFS integrated. Apple Music uses −16. None of them reject a master for being louder or quieter; they turn it down, and in some cases up. Keep true peak at or below −1 dBTP and choose a loudness that suits the music, typically −14 to −9 LUFS.
The targets
Commonly cited normalisation levels as of November 2026:
| Service | Plays at | Quiet masters | Peak guidance |
|---|---|---|---|
| Spotify | −14 LUFS (Loud −11 and Quiet −19 are Premium options) | Turned up, leaving 1 dB of headroom | Below −1 dBTP; below −2 dBTP if louder than −14 LUFS |
| Apple Music | −16 LUFS with Sound Check on | Turned up as far as peaks allow | −1 dBTP |
| YouTube | −14 LUFS | Left as they are | −1 dBTP |
| Tidal | −14 LUFS | Left as they are | −1 dBTP |
| Amazon Music | −14 LUFS | Left as they are | −1 to −2 dBTP |
| Deezer | −15 LUFS | Left as they are | −1 dBTP |
Spotify's row comes from its own documentation: Spotify for Artists, Loudness normalization. It says tracks are adjusted to −14 LUFS measured to ITU-R BS.1770, and that whole albums are normalised as a unit so the level differences between songs are kept. The other rows are the figures widely reported by mastering engineers and distributors. Not every service publishes its numbers, they change without announcement, and listeners can switch normalisation off. Check a service's own help pages before a release that depends on a detail.
What normalisation does
The service measures the integrated loudness of your master once, then applies a fixed gain on playback. A −9 LUFS master is turned down 5 dB to play at −14. A −14 master is untouched.
It changes volume and nothing else. It doesn't compress or limit your track, with one exception: Spotify's Loud setting applies a limiter when it has to raise a quiet, dynamic track.
What that means for how loud to master
Two masters of one song, one at −14 and one at −8, play at the same loudness on a normalised service. The −8 version has 6 dB more limiting and has been turned down 6 dB. It has flatter drums and no extra volume to show for it.
That doesn't make −14 the right answer for everything.
- Dense genres such as modern pop, rock, EDM and hip-hop are usually mastered at −10 to −8 LUFS. The density is part of the sound, and it carries over where normalisation is off.
- Dynamic genres such as folk, jazz, classical and acoustic work often sit at −16 to −14, sometimes quieter.
- Services that only turn down will play a −18 master 4 dB quieter than its neighbours.
A practical range for most songwriters is −14 to −11 LUFS. Inside it, pick the level where the limiter is working 2 to 4 dB on the loudest sections and the chorus still hits harder than the verse.
The number that is a rule
True peak. Keep it at or below −1 dBTP. Services convert your file to lossy formats, and encoding raises peaks slightly. A master peaking at 0 dBFS can clip after conversion. If the master is louder than −14 LUFS, Spotify suggests −2 dBTP. See true peak vs sample peak.
Check your own master
Measure integrated loudness over the whole song, start to finish, and the true peak. The LUFS gain calculator shows what each service will do with those two numbers.
Quick answers
- What LUFS should I master to?
- Somewhere between −14 and −9 LUFS integrated depending on genre, with true peak at or below −1 dBTP. −14 is played back unchanged on most services; louder masters are turned down to match.
- Is −14 LUFS a requirement?
- No. It is the level most services play music at. They accept louder and quieter masters and adjust the playback volume.
- Do I need a different master for each platform?
- No. One master with a true peak under −1 dBTP works everywhere.
Audizer does this when you ask.A Mac DAW with an engineer built in. Say what you want and it makes the edit. Free download.
Get Audizer